trekhost.blogg.se - Qualcomm hs usb qdloader 9008 software

#Qualcomm hs usb qdloader 9008 software how to#
#Qualcomm hs usb qdloader 9008 software install#
#Qualcomm hs usb qdloader 9008 software zip file#
#Qualcomm hs usb qdloader 9008 software update#
#Qualcomm hs usb qdloader 9008 software driver#

#Qualcomm hs usb qdloader 9008 software install#

Download and install the ADB and Fastboot Tools on your PC.

#Qualcomm hs usb qdloader 9008 software how to#

So there you are! You just managed to download Qualcomm HS-USB QDLoader 9008 drivers and also learned how to install them using two different methods. Now you can go ahead and unlock your device by flashing the stock firmware using the QPST tool, while your Android device is in EDL mode.If your device is working, then only follow the second step, either skip this step if your device is dead.

After installing the drivers, the device should be recognized as “ Qualcomm HS-USB QDLoader 9008” in Device Manager.

#Qualcomm hs usb qdloader 9008 software driver#

Select “ Install this driver anyway” to confirm and install Qualcomm HS-USB QDLoader 9008 drivers on your PC.You would now see a Windows security prompt on your PC screen.Once you have selected the folder, click “ Next“.

Click “ Browse my computer for driver software” and select the folder that contains the USB driver files.

#Qualcomm hs usb qdloader 9008 software update#

Right-click and select “ Update Driver Software“.You will see your Android device detected as “ QHUSB_BULK” in the “ Other Devices” tab, along with a yellow exclamation point. This indicates that the PC is unable to recognize your device as USB drivers have not been installed until now.Go to Control Panel > Device Manager on your Windows PC.Note: On some devices, simply running the above command to restart in EDL mode may not work. In that case, you will need to search online for a dedicated method for your specific Android device.Type the following code in the PowerShell window to reboot your Android device in EDL mode:.Select the option ” Open PowerShell window here“.Press the SHIFT key and right-click on an empty area within this folder.Navigate to the folder where the ADB and Fastboot tools are installed.Connect your Android device to PC via USB cable.

#Qualcomm hs usb qdloader 9008 software zip file#

Extract the zip file to a suitable location on your PC.

Download the “Qualcomm-Driver.zip” file.

If the automatic method doesn’t work and your PC still doesn’t recognize your Android device, you should follow the manual method as listed below. That’s all! Qualcomm Android USB Drivers are now properly installed on your PC.

Once the installation is complete, click “ Finish” to exit the InstallShield wizard.

Now, click the “ Install” button to install Qualcomm HS-USB QDLoader 9008 drivers on your Windows PC.

Click “ Next” after accepting the terms and conditions.

Accept the terms and conditions by selecting the “ I accept the terms in the license agreement” option.

Click “ Next” in the InstallShield wizard that appears.

Double click on the executable file “ QDLoader_HS-USB_Driver_xxbit_Setup.exe“.

Go to the directory where the file was downloaded.

Download Qualcomm HS-USB QDLoader 9008 drivers corresponding to your PC’s CPU architecture (32-bit or 64-bit).

However, if the first method fails for some reason, you can follow the second method which uses the manual approach for installation. The supplied Qualcomm USB drivers can be installed on any 32-bit or 64-bit Windows PC via two different methods. The first method follows an automatic and straightforward approach and allows you to install the aforementioned drivers simply using the configuration wizard. This is the easiest and recommended way to install Qualcomm HS-USB QDLoader 9008 drivers on your PC. How to install Qualcomm HS-USB QDLoader 9008 drivers?

64-bit version: QDLoader_HS-USB_Driver_64bit_Setup.exe.

32-bit version: QDLoader_HS-USB_Driver_32bit_Setup.exe.

Make sure you download the USB drivers according to the “Installation Method” you have chosen

At the end of the installation process, you can exit Test mode by entering the following code:īcdedit / set testsigning off Download Qualcomm HS-USB QDLoader 9008 drivers.

Type the following code in the CMD window:.

If you are using Windows 8 or later, be sure to turn off “Driver Signature Verification” on your PC. This can be done by entering “Test Mode”. To do this, follow these steps:.

Also, enable “USB Debugging” (found in “Developer Options”) on your device.

Download and install the latest version of ADB and Fastboot tools.

Prerequisitesįollow the steps below only if you intend to install Qualcomm HS-USB QDLoader 9008 drivers via the “Manual” method. However, if you prefer to install the drivers using the “Direct Method”, you can skip this part. So, if you want to remove the brick from your device, you must first download the required Qualcomm USB drivers and install them on your PC. The instructions below will help you install these USB drivers on any Windows 10 / 8.1 / 8/7 PC with 32 or 64-bit architecture. But if your device runs a Qualcomm Snapdragon processor, then there is a chance you can download and install stock firmware using the QPST tool to reset your locked, brick-jargon device. And for this, your device must be booted in EDL mode and recognized as “ Qualcomm HS-USB QDLoader 9008” by the Device Manager of your Windows PC.